Excellent for Light to Medium Traffic Loads
The Proven Professional Paving Jointing Mortar
ROMPOX® - D1 is a light to medium vehicle rated, two-component Jointing Mortar suitable for driveways, parking spaces and all vehicular loading applications up to 7.5t. ROMPOX® - D1 is a proven resin jointing solution with increased pouring capacity that is self-compacting, water emulsifiable and suitable for 3mm (1/8”) wide joints on all natural stone and concrete surfaces. Resistant to ants, weeds, frost, de-icing salt and is pressure washer safe.
- For traffic loads up to 7.5 T
- For joint widths from 1 ⁄8” | 3 mm
- Self compacting
- Pressure washer safe
- Increased pouring capacity & water emulsifiable
- Ideal for driveways & parking spaces
- Frost and de-icing salt resistant
1. Mixing
Pour the 55 lbs filler material into the mixing tub and start the mixing process. Whilst mixing, slowly add the ROMPOX® D1 components into the mixture. Use professional agitator or rotary-drum mixer / compulsory mixer.
2. Add Water
Rinse both bottles with 0.5 litres of water, close, shake well, add to mix and mix for 3 minutes. After mixing for 3 minutes, add 3 litres | 0.8 gal of water. Continue mixing well for another 3 minutes. Total mixing time: minimum 6 minutes.
3. Pre-Wet
Intensely pre-wet surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.
4. Application
Apply the mixed pavement jointing mortar onto the pre-wetted surface by pouring out in three or four spots to optimise flow capacity. Work carefully into the joints using a squeegee/rubber slider, ensuring it passes deep into the joints and fills them completely.
5. Sweep Off
After approx. 10 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping.
6. Final Cleaning
Finally, use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.
